IndieRF suite

Op-Amp Lab

A 0 to 2.5 V DAC into a −3.0 to −1.5 V gate bias, on a 2.5 V reference, is 20 k, 7.5 k, 12 k and 10 k on E24, with 0 V error at both ends. The Rescaler wizard finds that from the two points; the next E24 set it lists is 6.6 mV off at full scale. Place it, and the gain and offset readout gives m = 0.6 V/V and b = −3 V, with the 22 ppm that the op-amp's A0 = 1e5 takes off both.

Start from a template

Each one opens with its sources, a DC sweep and an AC sweep, and solves at once. Your current sheet stays in File, Recent.

Gate bias

The rescaler on a gate, with the gate-bias safety table and the gate's window shaded on the DC sweep.

Loading the editor.

Which op-amp circuit should come next?