Editing this canvas is easier on a larger screen. The link opens the empty tool. The plot stays on this phone.

3 Check and fix
100%

Drop a datasheet plot, paste a screenshot, or open a file

Then run Auto-trace from the Inspector. PNG, JPEG, WebP, GIF, or a PDF page. The image stays in your browser.

How to extract data from a graph image

IndieRF Plot Digitizer turns a datasheet curve into a table. It runs in the browser. The image is not uploaded.

How to use

  1. 1Open a plot. Drop a PNG or JPEG, paste a screenshot, open a PDF from the sidebar, or try the sample plot.
  2. 2Auto-trace. One click in the Inspector runs its stages in order: plot area, axes, legend, curves, digitize. Each row shows what it read. Tap a row to see it on the plot.
  3. 3Check and fix. The axis numbers drawn on load are placeholders, and Export stays off until Auto-trace reads the ticks or you type the limits. Then drag a point, delete one, or move the legend box. Auto-trace keeps what you set until you unlock it.
  4. 4Export. Open Data & export in the Inspector for the table. Download CSV, Cascade JSON, or a minimum-phase .s1p. That phase is calculated, not measured. The image stays in the browser.
Try a sample, type each tick's printed value (0 and 6 GHz, 5 and 20 dB), then click the line's corner at each GHz: the table lists 7 points, from 7.978 dB at 0.004 GHz.

FAQ

How do I extract data from a graph image?

Open the plot in IndieRF Plot Digitizer and click Auto-trace. It reads the axis limits and follows each colored curve, then you download CSV. If the tick labels are unreadable, type the axis values at the frame edges as Xmin, Xmax, Ymin, and Ymax. The image is processed in the browser and is not uploaded.

Can I get an S-parameter from a plot?

A magnitude curve can be saved as a one-port Touchstone .s1p. The phase in that file is a minimum-phase calculation, not a measured angle, so it is the wrong model for a filter or a long line. The tool does not build a two-port .s2p from the drawing.

Is IndieRF Plot Digitizer a WebPlotDigitizer alternative?

It is a free browser digitizer for datasheet curves such as gain, noise figure, P1dB, IP3, and insertion loss versus frequency. Bar charts, eye diagrams, and Smith-chart figures are not a guided workflow.

Does digitizing a plot require an account?

No. Opening an image, Auto-trace, CSV, Touchstone, and Cascade JSON are free with no account. A shared link opens the empty tool. It does not contain the image.

Checked against plots drawn from known data: the cases, the tolerance and what the check does not cover.