ADS-B LNA first vs filter first: 2.33 dB better NF for 2.5 dB less P1dB headroom
With the same five parts, moving the LNA ahead of the SAW filter takes system NF from 4.99 to 2.65 dB and raises SNR at −85 dBm by 2.33 dB. The cost is 2.5 dB of blocker headroom: the chain's input P1dB falls from 3.0 to 0.5 dBm, because the SAW's loss no longer sits ahead of the LNA.
Open LNA firstOpen filter first
| Row at the SDR | LNA first | Filter first |
|---|---|---|
| Cumulative NF | 2.65 dB | 4.99 dB |
| SNR | 23.31 dB | 20.98 dB |
| Noise Floor (Input) | −108.31 dBm | −105.98 dBm |
| Cumulative Gain | 44.00 dB | 44.00 dB |
| Cumulative IIP3 | 11.50 dBm | 14.00 dBm |
| Cumulative IP1dB | 0.50 dBm | 3.00 dBm |
| P1dB Headroom | 85.50 dB | 88.00 dB |
Blocker headroom here is the budget's P1dB Headroom row: the chain's input P1dB (Cumulative IP1dB) minus the −85 dBm carrier, both at the antenna. The template's SAW is a scalar 2.5 dB at every frequency, so this is an in-band blocker. A real SAW also rejects an out-of-band blocker by its stopband rejection before the LNA sees it, which is the reason to keep the filter first next to a strong transmitter.
LNA first
NF 2.65 dB: Antenna cable, 1.5 dB loss sets it, 1.10 dB better if ideal, 49% of the excess noise.
IIP3 11.50 dBm: LNA, NF 0.8 dB, 20 dB gain, OIP3 30 dBm is the only rated stage.
Filter first
NF 4.99 dB: SAW band-pass 1090 MHz, 2.5 dB loss sets it, 1.86 dB better if ideal, 51% of the excess noise.
IIP3 14.00 dBm: LNA, NF 0.8 dB, 20 dB gain, OIP3 30 dBm is the only rated stage.