RF cascade examples, solved: receivers and transmitters from 915 MHz to 28.5 GHz
Each page is one built-in template of the cascade analyzer, solved when the site was built: the budget at the last block, the level diagram, the stage that limits it and one part to change. Open any of them and the analyzer loads an editable copy.
| Chain | Result | Analyzer |
|---|---|---|
| Superhet Rx2.45 GHz RF · 140 MHz IF | 3.36 dB NF, −85.4 dBm sensitivity in 20 MHz | Open |
| Direct-sampling wideband SDR1.2 GHz center · 200 MHz bandwidth | 4.45 dB NF, 18.8 dB below ADC clipping | Open |
| LoRa 915 MHz Rx915 MHz · 125 kHz bandwidth | 4.66 dB NF, −118.3 dBm noise floor in 125 kHz | Open |
| ADS-B Rx, filter first1090 MHz · 2 MHz bandwidth | 4.99 dB NF with the SAW ahead of the LNA | Open |
| ADS-B Rx, LNA first1090 MHz · 2 MHz bandwidth | 2.65 dB NF with the LNA ahead of the SAW | Open |
| 2.4 GHz chip-antenna Rx2.44 GHz · 1 MHz bandwidth | 8.00 dB NF, −94.0 dBm sensitivity at 12 dB SNR | Open |
| 5G mm-wave Tx28 GHz · 100 MHz channel | 44.5 dBm EIRP, 8.7 dB P1dB headroom | Open |
| Superhet Tx — Ka-band sweep27.5–30.5 GHz · 1 GHz steps | 57.1 dBm EIRP, 6.2 dB P1dB headroom | Open |
| Power-combining Tx — 2:1 PA module2.2 GHz · 20 MHz channel | 36.5 dBm out of two combined PA branches | Open |
Same parts, two orders: ADS-B LNA first vs filter first: 2.33 dB better NF for 2.5 dB less P1dB headroom.