ADS-B 1090 MHz receiver, LNA first: 2.65 dB NF

Antenna cable, LNA, SAW filter, feeder and SDR cascade to 2.65 dB NF and 44.0 dB gain, 2.33 dB better than the filter-first order with the same parts. The SAW now sits behind 20 dB of gain; the price is blocker headroom, 88.0 dB to P1dB with the filter first and 85.5 dB here.

Open in the analyzer

Change this: the LNA's NF from 0.8 to 0.5 dB. NF reads 2.38 dB, and the 1.5 dB antenna cable ahead of the LNA stays the largest term.

NF 2.65 dB: Antenna cable, 1.5 dB loss sets it, 1.10 dB better if ideal, 49% of the excess noise.

IIP3 11.50 dBm: LNA, NF 0.8 dB, 20 dB gain, OIP3 30 dBm is the only rated stage.

Block diagram

1090 MHzantenna, −85 dBmaircraftAntenna cable,1.5 dB lossLNA, NF 0.8 dB,20 dB gain, OIP330 dBmSAW band-pass1090 MHz, 2.5 dBlossCable toreceiver, 2 dBlossSDR receiver, NF6 dB, 30 dB gain

Level diagram

−150−100−50050100dBm1090 MHz anten…Antenna cable,…LNA, NF 0.8 dB…SAW band-pass …Cable to recei…SDR receiver, …
Carrier in channelNoise in channelCumulative OP1dBCumulative OIP3Output referred, after each block.

Budget at SDR receiver, NF 6 dB, 30 dB gain

RowValue
Cumulative Gain44.00 dB
Source Contribution−41.00 dBm
Cumulative NF2.65 dB
SNR23.31 dB
Noise Density−127.32 dBm/Hz
Total Noise Power−64.31 dBm
Noise Floor (Input)−108.31 dBm
P1dB Headroom85.50 dB
Cumulative OIP355.50 dBm
Cumulative IIP311.50 dBm
Cumulative OP1dB43.50 dBm
Cumulative IP1dB0.50 dBm
First Stage to Compress OP1dB43.50 dBm
SFDR79.87 dB
Linear Dynamic Range108.81 dB
IM3−234.00 dBm
Cumulative Noise + Distortion Ratio23.31 dB
Fully Linear Power−41.00 dBm
Local Compression0.00 dB
Cumulative Compression0.00 dB

Every number here is the analyzer's own, solved when the site was built from the same template the button opens. How the solver is checked.

ADS-B LNA first vs filter first: 2.33 dB better NF for 2.5 dB less P1dB headroom

Model limits

Other solved chains

Question about this chain, or a correction?