ESD diode SPICE model on a 50 ohm line: 0.2 pF gives S11 -13.6 dB at 6 GHz

A 0.2 pF ESD diode with 0.4 nH of package across a 50 ohm line gives S11 of -13.65 dB and S21 of -0.20 dB at 6 GHz, and S11 of -7.64 dB at 10 GHz. TI's SLAAET6 works the bare capacitance by hand at one frequency; this sweeps the whole SPICE macro, package inductance included, to 10 GHz.

Open in the simulator

Change this: CJO=0.2p to 0.5p in the macro, import it again and wire it in for X1. S11 at 6 GHz goes from -13.65 dB to -5.28 dB.

-40-30-20-100246810GHzdB
S11S21Circles mark the table's numbers.
QuantityValueRead at
S11-13.65 dB6 GHz
S21-0.20 dB6 GHz
S11-12.40 dB6.75 GHz
S11-7.64 dB10 GHz
S11 with CJO 0.5 pF-5.28 dB6 GHz

Every number here is the simulator's own, computed when the site was built from the same circuit the button opens. How the engine is checked.

The circuit

P1Z=50SUB12X1GND1P2Z=50

The macro

Illustrative values written by IndieRF, not a real part. Paste it, or your vendor's macro, into File, Import SPICE subcircuit.

* Illustrative RF ESD diode, hand-written by IndieRF. Not a real part.
* 0.2 pF at 0 V, 0.4 nH of package, 0.8 ohm series resistance.
.subckt ESD_RF io ref
LS io k 0.4n
D1 ref k DESD
.model DESD D(IS=1e-14 RS=0.8 CJO=0.2p VJ=0.7 M=0.3 BV=6 IBV=1m)
.ends ESD_RF

Nothing biases the diode, so it sits at 0 V and its junction is CJO; a DC bias or a large signal moves it. The macro is IndieRF's own illustrative values, not a real part.

Other solved examples

Question about this circuit, or a correction?