Chip antenna matching from the maker's documents
Espressif prints 35+j0 Ω as the chip conjugate point for the ESP32-S3 and ESP32-C3, and those two pages open Match with it. Semtech and Nordic print reference parts and no target impedance, so their pages list the parts only. Every value is copied as printed, with the document, revision and page.
| Chip | Printed target | Reference parts | Source |
|---|---|---|---|
| ESP32-S3 | 35 Ω | C11 1.2 ~ 1.8 pF, L2 2.0 ~ 3.0 nH, C12 1.8 ~ 1.2 pF | ESP32-S3 Hardware Design Guidelines v1.8 (2025-07-03) |
| ESP32-C3 | 35 Ω | C11 1.2 ~ 1.8 pF, L2 2.0 ~ 3.0 nH, C12 1.8 ~ 1.2 pF | ESP32-C3 Hardware Design Guidelines v1.8 (2025-06-05) |
| SX1262 | None printed | L2 0R, L1 47nH, L3 2.5nH, C4 3.0pF, C5 5.6pF, C6 39pF, L4 4.7nH, C7 1.8pF | SX1262MB1CAS RF Module, 4-Layers 915MHz BOM BOM V1a, SCH e428v03a (2023-09-25) |
| nRF52840 | None printed | C3 1 pF, L1 4.7 nH, C4 1.2 pF, L5 2.2 nH | nRF52840 Product Specification, Reference circuitry v1.11 (October 2024) |
A chip gets a page only when its maker prints the numbers. Values from forum posts, module makers or third-party notes are left out.