Ecoflex 15 cable loss

Ecoflex 15 loses 0.35 dB per 10 m at 144 MHz and 1.61 dB at 2.4 GHz. The part is SSB-Electronic Ecoflex 15, item 6090, and every number here is fitted to the attenuation table on its datasheet. Drag the cursor or type a frequency, length and power to read the loss for your run.

Ecoflex 15 loss for 10.0 m, matched

0.010.030.10.313101 MHz10 MHz100 MHz1 GHzdB for 10.0 m2.40 GHz

Fit inside the printed tableExtrapolatedDatasheet rowsBand marks (the cursor snaps to them)

10.0 m at 2.40 GHz

Lost
1.61 dB
Out of 100 W
69.1 W
Delivered
69.1%

Neighbours at 2.40 GHz

  1. LMR-6001.42 dB
  2. Ecoflex 151.61 dB
  3. LMR-4002.17 dB
  4. Ecoflex 102.20 dB

Rank 2 of 24 cables with a number at 2.40 GHz, lowest loss first.

Loss chart

Loss of Ecoflex 15 against frequency, per 10 m and per 100 ft: 0.35 dB per 10 m at 144 MHz and 1.61 dB per 10 m at 2.4 GHz.
Matched loss from the fit, dB per 10 m on the left axis and per 100 ft on the right. Dots are the datasheet rows. The dashed part is past the printed table. The line stops at the usable limits.

Loss at 144 MHz to 5.8 GHz

FrequencydB per 10 mdB per 100 ftFrom
144 MHz0.351.07printed
433 MHz0.621.90printed
915 MHz0.942.85printed
1.09 GHz1.033.14printed
2.4 GHz1.614.90printed
5.8 GHz2.708.23printed

Printed means inside the datasheet table. A frequency outside the usable range names the limit instead of a number.

Cross-section

Jacket OD⌀ 14.6 mmDielectric⌀ 11.3 mmCentre conductor⌀ 4.5 mm5 mm
Drawn to scale from the printed diameters. The shield and jacket layers between the dielectric and the OD are not printed separately, so they share one ring.

Loss at each band

BanddB per 10 mdB per 100 ft
1.8 MHz0.040.11extrapolated
3.5 MHz0.050.16extrapolated
7 MHz0.070.23
14 MHz0.110.32
28 MHz0.150.46
50 MHz0.200.62
144 MHz0.351.07
433 MHz0.621.90
915 MHz0.942.85
1.57 GHz1.263.86
2.4 GHz1.614.90
5.8 GHz2.708.23

Matched loss from the fit. A band past the printed table is marked extrapolated. A band outside the usable range names the limit instead of a number.

Datasheet table

MHzPrinted, dB/100 mFitFit − printed
50.60.6305+0.030
100.860.8945+0.034
501.962.027+0.067
1002.812.896+0.086
1443.43.498+0.098
2004.054.153+0.103
30055.140+0.140
4326.16.239+0.139
5006.76.747+0.047
8008.68.698+0.098
10009.89.829+0.029
129611.411.34-0.056
150012.412.31-0.092
180013.813.64-0.164
200014.614.47-0.125
240016.216.06-0.138
300018.318.27-0.032
400021.621.62+0.021
500024.624.69+0.091
600027.527.56+0.061

SSB-Electronic Ecoflex 15 data sheet (item 6090), accessed 2026-10-25. SSB-Electronic Ecoflex 15, item 6090.

α (dB/m) = a·√f + b·f with f in GHz: a = 0.08847, b = 0.009818. Least squares over the 20 printed rows. RMS miss 0.093 dB/100 m, largest 0.164 dB/100 m at 1.80 GHz.

Usable range and build

Printed from 5 MHz to 6 GHz. Usable from 1 MHz to 6 GHz; the top is set by the rated maximum. TE11 cutoff 10.3 GHz, from the printed diameters and velocity factor.

Maker
SSB-Electronic
Impedance
50 Ω
Velocity factor
0.85
Delay
3.92 ns/m
Dielectric
foam polyethylene
Centre conductor
4.5 mm
Dielectric diameter
11.3 mm
Jacket OD
14.6 mm
Rated maximum
6.00 GHz
Printed cutoff
not printed
Weight
245 kg/km
Bend radius, installed
58.4 mm
Bend radius, repeated
116.8 mm
Shield
Copper foil plus 75% bare copper braid
  • Typical attenuation at 20°C. Bend radius is printed as 4× (single) and 8× (repeated) the 14.6 mm diameter. The sheet prints no date or revision.

Compare all cablesEvery cable's fit as CSV (CC BY 4.0)Question about this cable, or a correction?