IndieRF Coax Loss Calculator

Which coax loses least at your frequency

All 24 cables from the Coax Loss calculator, ranked at one frequency and run length. Drag the cursor across the chart and the bars re-rank: each one is the power that reaches the far end. Every line is fitted to that maker's printed table, dashed where the fit runs past it, and it stops where the cable stops being usable.

Group

10.0 m at 2.40 GHz: LMR-600 loses the least, 1.42 dB, and delivers 72.1 W of 100 W. Belden 83265 loses the most, 23.52 dB (extrapolated).

Pick up to 3 cables in the list to open them side by side in Coax Loss.

Loss per 10 m, matched

0.010.11101001 MHz10 MHz100 MHz1 GHz10 GHzdB per 10 m2.40 GHz

Fit inside the printed tableExtrapolatedDatasheet rowsBand marks (the cursor snaps to them)

Hover or tap a line or a bar to highlight it.

Show or hide

Power delivered, 10.0 m at 2.40 GHz

Bar length is the share of 100 W that reaches the far end into a matched load. Striped bars use the fit past the printed table.

One page per cable

Each page has the printed table, the fit and its miss, loss at twelve bands, a cross-section to scale, and the build fields as printed.

Buying cable for a 2.4 GHz run: 10 m of each common cable with the watts left from 100 W, which ones are extrapolated there, and what a 2:1 antenna reads at the radio, in coax loss at 2.4 GHz.

Question about a cable, or a correction?