Hand-Flex 086 cable loss
Hand-Flex 086 loses 2.64 dB per 10 m at 144 MHz (extrapolated) and 11.4 dB at 2.4 GHz. The part is Mini-Circuits 086 Hand-Flex cable, from the 086-XXMCR+ series sheet, Rev. OR, and every number here is fitted to the attenuation table on its datasheet. Drag the cursor or type a frequency, length and power to read the loss for your run.
Hand-Flex 086 loss for 10.0 m, matched
Fit inside the printed tableExtrapolatedDatasheet rowsBand marks (the cursor snaps to them)
Neighbours at 2.40 GHz
- Harbour RG-4007.75 dB
- EZ 8610.02 dB
- Hand-Flex 08611.42 dB
- LMR-100A12.76 dB
- Belden 826213.48 dB, extrapolated
Rank 18 of 24 cables with a number at 2.40 GHz, lowest loss first.
Loss chart

Loss at 144 MHz to 5.8 GHz
| Frequency | dB per 10 m | dB per 100 ft | From |
|---|---|---|---|
| 144 MHz | 2.64 | 8.03 | extrapolated |
| 433 MHz | 4.64 | 14.1 | extrapolated |
| 915 MHz | 6.84 | 20.9 | extrapolated |
| 1.09 GHz | 7.50 | 22.9 | printed |
| 2.4 GHz | 11.4 | 34.8 | printed |
| 5.8 GHz | 18.5 | 56.4 | printed |
Printed means inside the datasheet table. A frequency outside the usable range names the limit instead of a number.
Cross-section
Loss at each band
| Band | dB per 10 m | dB per 100 ft |
|---|---|---|
| 1.8 MHz | Below the usable range, which starts at 33.3 MHz | |
| 3.5 MHz | Below the usable range, which starts at 33.3 MHz | |
| 7 MHz | Below the usable range, which starts at 33.3 MHz | |
| 14 MHz | Below the usable range, which starts at 33.3 MHz | |
| 28 MHz | Below the usable range, which starts at 33.3 MHz | |
| 50 MHz | 1.54 | 4.69extrapolated |
| 144 MHz | 2.64 | 8.03extrapolated |
| 433 MHz | 4.64 | 14.1extrapolated |
| 915 MHz | 6.84 | 20.9extrapolated |
| 1.57 GHz | 9.11 | 27.8 |
| 2.4 GHz | 11.4 | 34.8 |
| 5.8 GHz | 18.5 | 56.4 |
Matched loss from the fit. A band past the printed table is marked extrapolated. A band outside the usable range names the limit instead of a number.
Datasheet table
| MHz | Printed, dB/100 ft | Fit | Fit − printed | Maker formula |
|---|---|---|---|---|
| 1000 | 21.85 | 21.85 | +0.004 | 21.85 |
| 2000 | 31.56 | 31.56 | -0.003 | 31.56 |
| 3000 | 39.26 | 39.26 | -0.000 | 39.26 |
| 4000 | 45.93 | 45.93 | -0.002 | 45.93 |
| 6000 | 57.47 | 57.47 | +0.002 | 57.47 |
Mini-Circuits 086-XXMCR+ Hand-Flex cable series data sheet, Rev. OR, accessed 2026-10-25. Mini-Circuits 086 Hand-Flex cable, from the 086-XXMCR+ series sheet, Rev. OR.
α (dB/m) = a·√f + b·f with f in GHz: a = 0.6806, b = 0.03640. Least squares over the 5 printed rows. RMS miss 0.003 dB/100 ft, largest 0.004 dB/100 ft at 1.00 GHz.
The sheet's own formula: dB/100 ft = 0.65598·√f + 0.00111·f with f in MHz.
Usable range and build
Printed from 1 GHz to 6 GHz. Usable from 33.3 MHz to 6 GHz; the top is set by the rated maximum.
- Maker
- Mini-Circuits
- Impedance
- 50 Ω
- Velocity factor
- 0.7
- Delay
- 4.77 ns/m
- Dielectric
- PTFE
- Centre conductor
- not printed
- Dielectric diameter
- not printed
- Jacket OD
- not printed
- Rated maximum
- 6.00 GHz
- Printed cutoff
- not printed
- Weight
- 28.87 g/m
- Bend radius, installed
- 6 mm
- Bend radius, repeated
- 30 mm
- Shield
- Tin-soaked copper braid
- This is the only Mini-Circuits sheet with a cable-only table for the 086 cable, and its MCX series is rated to 6 GHz, so loss stops there. The SMA versions of the same cable are rated to 18 GHz but print only assembly loss with connectors. The sheet labels no cable OD. The printed formula gives the typical table; the sheet's maximum is that times 1.1.
Compare all cablesEvery cable's fit as CSV (CC BY 4.0)Question about this cable, or a correction?